Jota 301L
0
Mandrels, with external thread, conical shape
Pack of 5
Description
Mandrels, with external thread, conical shape
Pack of 5
Note: These instruments should be conditioned using a rust protection spray to avoid the formation of black spots/margins or oxidation areas during preparation of non-stainless steel instruments in an autoclave/ steam sterilizer.
Related products
DFS 111 (Clinical) – 837
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
DFS 108 / F: 108 (Clinical)
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
DFS 002 (Clinical) – 802
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
DFS 069/ F: 069 (Clinical) – 909
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
DFS 068 (Clinical) – 909
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm