Jota 303
0
Mandrel for discs, with internal thread and screw shape
Pack of 5
Description
Mandrel for discs, with internal thread and screw shape
Pack of 5
Note: These instruments should be conditioned using a rust protection spray to avoid the formation of black spots/margins or oxidation areas during preparation of non-stainless steel instruments in an autoclave/ steam sterilizer.
Related products
DFS 137 (Clinical)
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
DFS 010 (Clinical) – 805
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
DFS 130 (Clinical)
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
DFS 109 (Clinical) 835
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
DFS 002 (Clinical) – 802
* FG Diamonds – Royal line with two-layer diamond technology
All royal line FGs are packed as 5 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm
* FG piranhas with three-layer diamond technology
Piranhas are packed as 2 pieces.
F = ISO-Shape-Nr. · hl = head length in mm
d = diameter in 1/10 mm